New druvaTEC 100m3 series CHECK IT OUT close
Home » HARDFACING ELECTRODES

HARDFACING ELECTRODES

RUTILE ELECTRODE FOR HARDFACING

Rutile-basic coated electrode for surfacing of machines and construction parts suffering from wear and tear, as well as of tools made of low-alloyed and cast steels. Resistant to medium abrasion, shock and pressure. Electrodes are easy to weld even on small welding equipment with low open arc voltage. Soft flow, almost no spatters, self releasing slag, nice aspect of the weld beads, crack free deposit, machinable by grinding.

WELDABLE STEEL RANGE:
Low alloyed steels, high alloyed steels, wear plates.

MAIN APPLICATION:
Hardfacing of moulds, scrapers, buckets and bucket teeth, excavator parts, chisels, conveyer screws, track links, cutting tools, crusher cones.

ADVANTAGES:

  • Universal all positions
  • Good resistance to abrasion, shock and pressure
  • Self releasing slag
  • Machinable by grinding

STANDARDS:

  • EN 14700: E Fe2

TECHNICAL DATA

Typical Weld Metal Composition (%): Fe:
(base)
C:
1
Si:
0,5
Mn:
1,3
Cr:
4,5
Hardness: ~ 600 HB; 55-60 HRC Obtained in pour weld metal, 2-3 layers
Electrode polarity: Negative
Output Circuit Voltage (OCV) ~ 45 V

 

Art. Nr. ∅ × Long
(mm)
Pcs/pack kg/pack Packs/box
E600101S 3,2 × 450 60 2,8 1
E600102S 4,0 × 450 40 2,8 1

 

Art. Nr. ∅ × Long
(mm)
Pcs/pack kg/pack Packs/box
E220115S 3,2 × 450 22 1,0 1

 

 

Technical Datasheets Top

Download Technical Datasheets

Acrobat Logo Choosing_the_Proper_Stick_Electrode_EN.pdf