The MS400 semi-automatic manifold reduces compressed gases of max. 300 bar to a continuous gas supply of 20 bar or 40 bar. It is designed for two types of gas source (cylinders or cylinder bundles). However, only one side at a time is the operating one and the other is then the reserve side. The MS400 will ensure continuity of gas flow by automatically changing from a nearly empty side to a full (reserve) side. MS400 is a complete valve unit wit

Automatic change over manifold mounted onto a stainless steel panel and consists of two pressure regulators with inlet and outlet pressure gauge, a switch unit with two magnetic valves including control unit and signal monitoring. Automatic change over for uninterrupted gas flow. Solenoid valves guarantee a maximum of exhaustion of the gas sources (cylinders or bundles). Acoustic and optical gas leakage monitoring via contact pressure gauges and

Acetylene manifold for one cylinder Part. No. Gas Description Pressure Inlet Outlet F27310033 A with automatic quick-acting shut-off device according to ISO 14114-2018 25/1,5 bar W21,8×1/14“LH male G1/2” male 0768111 A with manual quick-acting shut-off device according to ISO 14114-2014 25/1,5 bar W21,8×1/14“LH male G1/2” male TECHNICAL DATA Body material: Brass

This low pressure acetylene filter is used to avoid of mechanical particles coming from acetylene pipe works. It should be mounted at the outlet point upstream the isolating valve, regulator and flashback arrestor. Art. Nr. Gas Pressure Inlet Outlet 0863529 A Max 1,5 bar G1/2" G3/8" LH

Acetylene manifold | two inlets with manual changeover Part. No. Gas Description Pressure Inlet Outlet F27310034 A with automatic quick-acting shut-off device according to ISO 14114-2018 25/1,5 bar W21,8×1/14“LH male G1/2” male 0768140 A with manual quick-acting shut-off device according to ISO 14114-2014 25/1,5 bar W21,8×1/14“LH male G1/2” male TECHNICAL DATA Body

Nominal flow rate: 800 Nm3/h at 40 bar, pressure drop: max 15 bar. Art. Nr. Gas Pressure Inlet/Outlet Filter ability 0760582 O, D, N, CO2 Max 200 bar M42×1,5 50 μm

MR400 is high pressure high flow regulator for industrial applications Conforming to ISO 7291 High compressed gas service (O, D, N, CO2, M, H) up to 600Nm3/h and up to 300 bar inlet pressure 180° connectors for direct in-line mounting as manifold regulator Integrated inlet filter ensures reliable function of the regulator even with old or dirty upstream pipeworks Contains integrated pressure relief valve It can be used in many applica

High pressure manifold based on Manyflow unit for high flow applications. It can be used for oxygen and inert gases. It is designed mainly for cylinder bundles service. There are non-return valves at the Manyflow inlets, separated isolating valves and one central inlet shut-off valve. MR400 regulator contains high pressure and low pressure gauges and pressure relief valve. There is outlet low pressure ball valve downstream regulator. All componen

The expansion of N2O, CO2 or highly compressed gases such as O2 generates cold. This situation may require a heater to increase flow stability and prevent freezing of the regulator and other downstream components. ADVANTAGE The GGP250 is designed for pressures up to 300 bar (4000 psi). The highly efficient heating system uses a high pressure filter to increase the heat exchange surface. Safety is ensured by use of a thermostat and safety switch

Low pressure, high fl ow line regulator for oxygen, inert gases and fuel gases application. Regulator provides constant and stabile fl ow. Applications: Oxy-fuel processes, Gas pressure lines, Outlet points Adjustable outlet pressure. Inlet pressure up to 40 bar for inert gases and up to 30 bar for oxygen. Outlet pressure is adjustable up to 16 bar (see list of variants). Flow capacity up to 100 Nm3/h. TECHNICAL DATA Body and bo