GCE GROUP VERKÜNDET MARKENWECHSEL LESEN SIE MEHR close
Startseite » Produktsuche
GASSPARER

GS 20 Der neue GCE-Gassparer GS20 für das autogene Schweißen und Löten!  Der GS20 wird bevorzugt dort eingesetzt, wo es immer wieder zu Arbeitsunterbrechungen kommt nd erspart eine mühselige Neueinstellung der Flamme. Die Gaszufuhr wird beim Einhängen des Brenners am Haltebügel unterbrochen. An einer Wachflamme kann der Brenner leicht wieder gezündet werden, ohne dass die Parameter am Brenner neu e

KUPFERSTÜCKE LONGLIFE

Vorteile: extrem hohe lebensdauer, 1500 Lötmeter möglich, kein Nachschmieden, kein Nachfeilen. Typ: 300 gr Hammerform

PRESSURE WATCH DN20

The Pressure Watch has the same shut off function as an ordinary Emergency Shut-Off Valve Box. Behind the plexiglass you can find quick couplings and gauges. The quick couplings are used to connect spare cylinders with regulators and emergency supply hoses.To inform the hospital staff regarding gas failures the Pressure Watch is equipped with sensors for one of the following alarm systems; 1) – pressure switches that you connect to Gas alar

LF-690 SERIES - LOW FLOW HYDRAULIC REGULATOR

The LF-690 uses Ceramic Seating to provide ultimate protection against the harsh service encountered on hydraulic services. The unique seating cartridge provides a dampening action on this critical component to prevent ‘chattering’ or ‘unstable frequency resonance’. The regulator is self relieving with segregated captured vent to prevent deterioration to the loading mechanism and making the regulator cleaner to service. Th

LF-230 SERIES - LOW FLOW PRESSURE REGULATOR

FEATURES 316L SS Machined Wetted Parts Large sensitive elastomeric diaphragm 0,1 bar to 10 bar / 1,5 psi to 150 psi control range Minimal decaying inlet pressure effect For flow rates to 30Nm³/hr (@ max P2)

BP-301 SERIES - BACK PRESSURE REGULATOR

The BP-301 incorporates a highly sensitive piston to control pressures up to 70 bar with the lower Cv value of 0.1, and 35 bar with a higher Cv of 0.5. Both designs provide accurate back pressure control on liquid or gas applications. Unlike relief valves, the set load from the spring is not directly applied to the seating area, and the piston sensor provides accurate control throughout the control range. FEATURES Lightweight compact design

TS-300 SERIES - TWO STAGE PRESSURE REDUCING REGULATOR

The TS-300 provides stable pressure control under decaying cylinder pressures. The first stage of the regulator is set to 35 bar to allow maximum flow capability through the regulator. SPECIAL FEATURES Metal to metal sealing diaphragm Sealing area protected and centralized within the body of the regulator 0,04 % decaying pressure effect ‘Interstage’ relief valve option

BP-300 SERIES - LOW FLOW BACK PRESSURE REGULATOR

The BP-300 has been designed with a convoluted Inconel X750 diaphragm that lasts 50 % longer than a typical stainless steel designs. Its compact simple design makes it ideal for general purpose applications, where accurate control of upstream pressure is required. FEATURES Metal to metal diaphragm sealing Positive sealing against Viton seat Lightweight compact design Strong and sensitive diaphragm element High Accuracy

BP-MF690-15 SERIES - MEDIUM FLOW BACK PRESSURE REGULATOR

The BP-MF690 is a back pressure regulator for gas or liquid applications suited for typical low flow applications to xx lpm (liquid). The liquid version includes ceramic seating for ultimate protection against cavitation and erosion on aggressive application media such as water glycol and methanol. This accurate regulator controls inlet pressure and vents excess pressure back via the threaded ¾” NPT outlet port. FEATURES Inlet co

LF-300 SERIES - LOW FLOW PRESSURE REDUCING REGULATOR 35 BAR

The LF-300 has been designed with quality and reliability in mind, with genuinely unique features designed into this single stage regulator. Finite Element Analysis, combined with physical cycle tests, created an Inconel X750 diaphragm that lasts 50 % longer than a typical stainless steel designs.The metal diaphragm means that leak integrity is maintained, and that no sample media is absorbed by the sensing element – reducing purge times be